Lpr On Hp Hosts - Lantronix EPS1 Installation Manual

TCP/IP Configuration
To add a print queue:
1
From the main window, choose Print Spooling.
2
Choose Manage Print Server and Manage Print Queues.
3
Choose Add a print queue.
4
From the dialog box that appears, choose remote.
5
From the next dialog box, choose Remote Printing.
6 The Add a Standard Remote Print Queue dialog box will appear. Enter the fol-
lowing information.
The name of the print queue,
The name of the EPS unit,
The name of the EPS service,
The type of print spooler on the remote server, and
A description of the printer on the remote server.
7 A dialog box will appear: "Added print queue eps_prt". Click Done.
If you are unable to use SMIT, see the Print Server Reference Manual
Note:
on the CD-ROM for UNIX commands used to set up print queues.
8
Print to the queue using normal lp syntax.

4.2.5 LPR on HP Hosts

The System Administration Manager (SAM) allows you to create print queues.
Note: If you are unable to use SAM, the Print Server Reference Manual lo-
cated on the CD-ROM describes UNIX commands that can be used to
set up print queues.
To create a print queue:
1
At the HP prompt, type sam.
2
From the main application window, choose Printers and Plotters.
3
In the Printers and Plotters window, choose Printers/Plotters.
4
In the pull-down menu, select Remote Printer/Plotter from the Actions menu.
Figure 4-10: Printing to Queue
% lp -deps_prt filename
LPR Printing
4-9