Connecting The Fm Antenna - JVC UX-MD9000R Instructions Manual

CAUTION: Make all connections before plugging the System into an AC power outlet.

Connecting the FM Antenna

SUB WOOFER
OUT
AC IN
Connecting the AM (MW/LW) Antenna
SUB WOOFER
OUT
AC IN
OPTICAL
DIGITAL IN(AUX2)
R L
OPTICAL
DIGITAL IN(AUX2)
R L
Using the Supplied Wire Antenna
Using the Coaxial Type Connector (Not Supplied)
$ýæèðRKPýDQWHQQDýZLWKýFRD[LDOýW\SHýFRQQHFWRUýõ,(&ýRUý',1éèýêëèô
VKRXOGýEHýFRQQHFWHGýWRýWKHý)0ýæèðRKPý&2$;,$/ýWHUPLQDOï
,IýUHFHSWLRQýLVýSRRUñýFRQQHFWýWKHýRXWVLGHýDQWHQQDïý
Note: Before attaching a 75 ohm coaxial lead (the kind with a
round wire going to an outside antenna), disconnect the sup-
plied FM Wire Antenna.
CAUTION: To avoid noise, keep antennas away
from the System, the connecting cord and the AC
power cord.
AM loop antenna (Supplied)
Attach the AM loop to its base by snapping the tabs on the
loop into the slot in the base.
75
FM
ANT
AM EXT
AM
LOOP
ANT
Turn the loop until you have the best reception.
FM wire antenna (supplied)
FM outdoor antenna
(Not Supplied)
Coaxial cable
3