Common Operations - JVC UX-MD9000R Instructions Manual

COMPU PLAY
JVC's COMPU PLAY feature lets you control the most frequently used System functions with a single touch.
With One Touch Operation you can play a CD, an MD, or turn on the radio with a single press of the play button for that function. One Touch
Operation turns the power on for you, then starts the function you have specified. If the System is not ready (no CD in place, for example), the
System still powers on so you can insert a CD.
How One Touch Operation works in each case is explained in the section dealing with that function.
The COMPU PLAY buttons are:
On the Unit
38
CD button
TUNER BAND button
38
MD button
TAPE/AUX button
AUTOMATIC POWER ON
The System automatically turns on with the following operation.
0
• When you press the CD
tion does not change the function to CD.
When you press the button to turn off the System, the CD holder will automatically closed if it is opened.
• When you insert an MD, the System automatically turns on. However, this operation does not change the function to MD.

Common Operations

REMOTE CONTROL RM-RXUMD9000R
DIMMER SLEEP
DIMMER
CLOCK FM MODE TAPE/AUX
CLOCK
AHB. AUTO
SUPER PRO PRESET
AHB SUPER
PROGRAM RANDOM
PRO
BASS BASS TREBLE
TREBLE EDIT
/TITLE
UP
<
SET
DOWN
PTY/EON
TUNER
MD
BAND
VOLUME+,–
VOLUME
Turning the Power On and Off
Turning the System On
Press the button.
The display comes on and the STANDBY indicator goes out.
The System comes on ready to continue in the mode it was in when
the power was last turned off.
For example, if the last thing you were doing was listening to a
CD, you are now ready to listen to a CD again. If you wish, you
can change to another source.
If you were listening to the Tuner last, the Tuner comes on playing
the station it was last set to.
Turning the System Off ——————
Press the button again.
The "STANDBY" indicator lights up and the display is blank, except
for the clock display.
6
On the Remote Control
38
CD button
TUNER BAND button
38
MD button
TAPE/AUX button
button, the System automatically turns on and the CD holder opens to allow CD insertion. However, this opera-
REPEAT
CANCEL
DISPLAY
/CHARA
>
DISPLAY
DOWN
PTY/EON MODE
DISPLAY MODE
TAPE
/AUX
CD
CD SYNCHRO REC
REC PAUSE
DOWN
——————
STANDBY
STANDBY
TIMER/
SNOOZE
MULTI CONTROL UP CLOCK
CLOCK
OPEN/CLOSE
MD CD CD
TUNER
BAND
EJECT
VOLUME
MD
UP
VOLUME UP, DOWN
Some power (5W) is always consumed even though power is
turned off (called Standby Mode).
To switch off the System completely, unplug the AC power cord
from the AC outlet. When you unplug the AC power cord, the
clock will be reset to 0:00 after about 20 minutes, and preset Tuner
stations will be erased after about 24 hours.
Adjusting the Brightness
(DIMMER)
You can adjust the brightness of the display in three levels.
To change the brightness, press the DIMMER button on the Re-
mote Control.
Each time you press the DIMMER button, the brightness changes as
follows.
=
Bright (Level 1) Dark (Level 2)
ginning)
• When the System is turned on, the display brightens with the
Level 1.
• The "Minidisc" indicator will go out in Level 3.
STANDBY
STANDBY
indicator
PHONES
PHONES
ULTRA MICRO COMPONENT SYSTEM
UX-MD9000R
"Minidisc" indicator
= =
Darker (Level 3) (back to the be-