Safety Instructions - Elation ELARQUADBAR User Manual

2. SAFETY INSTRUCTIONS

• For stage operation, follow the Mounting and Installation guide described in Chapter 6
of this manual. Operating the fixture without suited safety aids such as safety cables
and/or clamps can increase the risk of damage and/or personal injury.
• Installation should only be performed by qualified and certified personnel.
• When mounting this fixture, use only the original rigging parts included with this fixture.
Any structural modification will void the original manufactures warranty and may
increase the risk of damage and/or personal injury.
• Those suffering from EPILEPSY should avoid looking directly into the light source of
this unit at all times.
• Never look directly into the light source of this fixture. You risk injury to your retina,
which may induce blindness.
• Do not attempt to operate this fixture if the power cord has become damaged or
frayed. Be sure the power cord is never crimped and/or damaged. If the power cord is
damaged, replace it immediately with a new one of similar power rating.
• This device falls under protection-class 1; therefore it is essential that this device be
grounded properly. Only qualified personnel should perform all electrical connections.
Be sure the available voltage matches the voltage requirements of this device.
• Always disconnect fixture from main power source before performing any type of
service and/or cleaning procedure. Only handle the power cord by the plug end.
Never pull out the plug by tugging the wire portion of the cord.
6
™
The ELAR QUAD BAR
equipment. To guarantee a smooth operation, it is important to follow the
guidelines in this manual. The manufacturer of this device will not accept
responsibility for damages resulting from the misuse of this fixture due to the
disregard of the information printed in this manual.
w w w . e l a t i o n l i g h t i n g . c o m
is an extremely sophisticated piece of electronic
ELAR Q UAD B AR
U ser M anual 2 .0
™