Elation ELARQUADBAR User Manual page 27

PERSONALITY – Reset Default
Restore factory settings function (ON or OFF), the default is OFF.
1. Tap MODE/ESC to access the main menu, tap UP/DOWN/LEFT/RIGHT until
"Personality" is highlighted and tap ENTER.
2. Tap UP/DOWN until "Reset Default" is displayed and tap ENTER.
3. Tap UP/DOWN to select desired mode ("ON" or "OFF") and tap ENTER to
confirm selection.
EFFECT ADJUST – Test Channel
Test each DMX function.
1. Tap MODE/ESC to access the main menu, tap UP/DOWN/LEFT/RIGHT until
"Effect Adjust" is highlighted and tap ENTER.
2. Tap UP/DOWN until "Test Channel" is displayed and tap ENTER.
3. Tap UP/DOWN to select desired function ("Strobe", "Dimmer", "Chase Effect",
"Chase Speed", "Red(1-16)", "Green(1-16)", "Blue(1-16)", "White(1-16)",
"Color Temp", "Color Mode") and tap ENTER to confirm selection
4. Tap MODE/ESC to return to the main menu.
EFFECT ADJUST – Manual Control
Adjust the lamp more easily. All effects will be canceled, the shutter opens and the
dimmer intensity will be set to 100 %. With the individual functions, you can focus the
light on a flat surface (wall) and perform the fine lamp adjustment.
1. Tap MODE/ESC to access the main menu, tap UP/DOWN/LEFT/RIGHT until
"Effect Adjust" is highlighted and tap ENTER.
2. Tap UP/DOWN until "Manual Control" is displayed and tap ENTER.
3. Tap UP/DOWN to select desired function ("Strobe", "Dimmer", "Chase Effect",
"Chase Speed", "Red(1-16)", "Green(1-16)", "Blue(1-16)", "White(1-16)",
"Color Temp", "Color Mode") and tap ENTER to confirm selection.
4. Tap UP to select desired value ("0-255") and tap ENTER to confirm selection.
5. Tap MODE/ESC to return to the main menu.
27
w w w . e l a t i o n l i g h t i n g . c o m
ELAR Q UAD B AR
U ser M anual 2 .0
™