Elation ELARQUADBAR User Manual page 20

FUNCTION - Set DMX Address
Adjust the desired DMX address via the Control Panel.
1. Tap MODE/ESC to access the main menu and tap ENTER.
2. Tap the UP/DOWN until "Set DMX Address" is displayed and tap ENTER.
3. Current DMX address is displayed (001-503), tap the UP/DOWN to select desired
DMX address (001-503) and ENTER to confirm selection.
4. Tap MODE/ESC to return to the main menu.
FUNCTION - DMX Value
Display the DMX 512 value of each channel.
1. Tap MODE/ESC to access the main menu and tap ENTER.
2. Tap UP/DOWN until "DMX Value" is displayed and tap ENTER.
3. Tap UP/DOWN to select desired "DMX Value" and ENTER to confirm selection.
4. Tap MODE/ESC to return the main menu.
FUNCTION - Slave Mode
Define the fixture as a slave.
1. Tap MODE/ESC to access the main menu and tap ENTER.
2. Tap UP/DOWN until "Slave Mode" is displayed and tap ENTER.
3. Tap UP/DOWN to select desired mode ("Slave1, Slave2, Slave3") and tap
ENTER to confirm selection.
4. Tap MODE/ESC to return to the main menu.
FUNCTION - Auto Program
Define the fixture mode ("Master" or "Alone") for running Auto Programs. Select
the desired internal programs under "Select Program", set the number of steps
under "Edit Program", and edit the individual scenes under "Edit Scenes".
1． Tap MODE/ESC to access the main menu and tap ENTER.
2． Tap UP/DOWN until "Auto Program" is displayed and tap ENTER.
3． Tap UP/DOWN to select desired mode ("Master"," Alone") and tap ENTER to
confirm selection.
4． Tap MODE/ESC to return to the main menu.
20
w w w . e l a t i o n l i g h t i n g . c o m
ELAR Q UAD B AR
U ser M anual 2 .0
™