Decommissioning
12 Decommissioning
12.1 Dismantling the Inverter
1. Disconnect the inverter on the AC and DC sides as described in section 8 "Disconnect the
Inverter from Voltage Sources" (page 60).
CAUTION!
Danger of burn injuries due to hot enclosure parts.
• Wait 30 minutes before disassembling until the housing has cooled down.
2. Loosen the connection screw between the
enclosure and the wall or loosen the security lock.
3. Remove the inverter from the wall mounting
bracket.
☑ The inverter is dismantled.
80
SB20_25_30HF-IEN102911
SMA Solar Technology AG
Installation Guide