Mounting The Quick Module - SMA SUNNY BOY 2000HF Installation Manual

The communication module (Quick Module)
5.4 Mounting the Quick Module
NOTICE!
Damage to the Quick Module due to improper installation in the inverter.
The Quick Module could be damaged when incorrectly installed in the inverter.
• Check the Quick Module for visible external damage before installation.
• Carefully install the Quick Module, as described in the following section.
1. Disconnect the inverter on the AC and DC sides as described in section 8 "Disconnect the
Inverter from Voltage Sources" (page 60).
2. Put the Quick Module into the designated holes on
the bracket.
3. Push the Quick Module upwards in the guide slot
until it clicks into place.
4. Check that the Quick Module is correctly seated.
The loops of the Quick Module and the bracket
must be positioned flush on top of each other.
☑ The Quick Module is mounted.
32 SB20_25_30HF-IEN102911
SMA Solar Technology AG
Installation Guide