Table of Contents
Advertisement
Notice: This is a general use remote controller, it could be used for the air conditioners
with multifunction; For some function, which the model dosen't have, if press the
corresponding button on the remote controller that the unit will not receive this signal
and will keep the original running status.
Remote control
X-FAN
X-FAN button
Press this button, can turn on or turn off
the drying.In Cool and Dehumidifying mode,
press this button and will display "X-FAN",
at this time the X-FAN is turned on. If repress
this button,"X-FAN" will be concealed, at
this time the X-FAN function is turned off.
After powered on, X-FAN OFF is defaulted.
When operating the ON/OFF button, or
switching mode to Cool or Dehumidifying
mode,the X-FAN function will keep the original
status. If unit is turned off, X-FAN OFF only
can be set up and send the signal. In Auto,
Fan as well as Heat mode, X-FAN function
can not be set up and there is no "X-FAN"
displaying.
TURBO
TURBO button
In Cool or Heat mode, press this button
can turn on or turn off the Turbo function.
After turned on the Turbo function, its
signal will be displayed. When switching
the mode or changing fan speed, this
function will be canceled automatically.
+
+ button
For presetting temperature increasing.
Press this button,can set up the temperature,
when unit is on or unit is off. Continuously
press and hold this button for more than 2
seconds, the corresponding contents will
be changed rapidly, until unpress the button
then send the information,
laying all along. In Auto mode, the temperature
can not be set up, but operate this
button can send the signal. Centigrade
setting range :16-30; Fahrenheit scale
setting range 61-86.
-
- button
Presetting temperature can be decreased.
Press this button, the temperature can be
set up, continuously press this button
and hold for two seconds, the relative
contents can quickly change, until unhold
this button and send the order that the
signal will be displayed all the time.
The temperature adjustment is unav-
ailable under the Auto mode, but the order
can be sent by if pressing this button.
TEMP
TEMP button
Press this button, could select displaying
the indoor setting temperature or indoor
ambient temperature.When the indoor unit
firstly power on it will display the setting
temperature, if the temperature's displaying
status is changed from other status to"
displays the ambient temperature, 5s later
or within 5s, it receives other remote control
signal that will return to display the setting
temperature. if the users haven't set up the
temperature displaying status,that will
display the setting temperature.
is disp-
",
Hide quick links:
Advertisement
Table of Contents
