Advertisement
4. Remove the glove box frame and plastic cross-piece.
Place protective
tape on the
driver's side of
the glove box
opening.
6 of 24
Remove and
discard this 5 mm
washer bolt.
Move aside any vehicle harness
that may be in the way, and use a
hacksaw blade to carefully cut
through the plastic cross-piece in
the areas shown. Remove and
discard the plastic cross-piece and
the protective tape.
AII 24158 (0209)
Release these
two lock tabs,
then remove the
relay assembly
from the glove
box frame.
Remove the glove
box frame (four bolts).
Place protective tape
(duct tape) on the
passenger's side of the
glove box opening.
2002 American Honda Motor Co., Inc – All Rights Reserved
Advertisement
