Advertisement
22. Install the A/C compressor belt.
Loosely
reinstall the
alternator.
Do not
tighten the
bolts yet.
Loosen
Turn the adjusting bolt until the
belt tension reaches the "New
Belt" tension.
Do not overtighten!
New Belt Tension:
830 to 980 N (85 to 100 kg)
NOTE: After the A/C kit is
installed and the engine has
run for 5 or more minutes (A/C
performance test), readjust the
belt to the "Used Belt" tension.
Used Belt Tension:
390 to 540 N (40 to 55 kg)
20 of 24
Fit the belt tension gauge
(T/N 07JGG-001010A) onto
the A/C compressor belt.
Do not use any other
gauge!
Torque this bolt to
its final torque of
.
44 N
m (33 lb-ft).
Tighten
Torque this bolt to
.
24 N
m (17 lb-ft).
Apply an initial torque
of 19 N
this bolt.
Torque this bolt to 44 N
(33 lb-ft), then recheck
the belt tension.
AII 24158 (0209)
.
m (14 lb-ft) to
.
m
Install the A/C
compressor belt.
Make sure the belt
is properly aligned
in the grooves of
the pulleys.
2002 American Honda Motor Co., Inc – All Rights Reserved
Advertisement
