Advertisement
Get parts group B.
17. Install the heat insulator.
Install the heat insulator
with two 6 x 12 mm flange bolts
(yellow-tinted), 95701-06012-08.
Torque the bolts to 10 N
(7 lb-ft).
Remove this 10 x 35 mm
mounting bolt, and remove
the compressor bracket.
18. Install the condenser and the receiver.
Install the left and right
condenser brackets with
two 6 x 16 mm washer-
bolts (gray-colored),
93403-06016-05. Torque
.
the bolts to 10 N
m (7 lb-ft).
Set the condenser on the
condenser mounts on the
front lower frame.
2002 American Honda Motor Co., Inc – All Rights Reserved
.
m
Reinstall this 10 x 35 mm
mounting bolt in this hole.
.
Torque the bolts to 44 N
m (33 lb-ft).
Mount the receiver to the left side
of the frame with one 6 x 16 mm
washer-bolt (gray-colored)
93403-06016-05. Torque the bolt
to 10 N
AII 24158 (0209)
Reinstall the compressor
bracket with the mounting
bolts removed in step 1.
Torque the bolts to 44 N
(33 lb-ft).
FRONT
.
m (7lb-ft).
17 of 24
.
m
Advertisement
