Reconnect the
recirculation
control motor
7P connector.
VEHICLE
HARNESS
Reconnect the
power transistor
4P connector.
2002 American Honda Motor Co., Inc – All Rights Reserved
Snap this wire
harness clip in place.
BLOWER
''''
Snap these wire
harness clips in place
on the blower unit.
Reconnect these
connectors to the
ECM/PCM.
Reinstall the
ECM/PCM.
Reconnect
the blower
motor 2P
connector.
AII 24158 (0209)
Reinstall the
ECM/PCM bracket.
Reattach the main
harness connector
to the connector
bracket.
Reconnect the
main harness
connector.
11 of 24