Network Name, Channel - LEGRAND Wireless access point Configuration Manual

1.4

/ NETWORK NAME, CHANNEL

You are now on the quick configuration page for the Access point.
In this configuration
tab, you will find the
network name (SSID)
and the security level
(encryption mode)
that need to be
defined.
- Define your network
name (SSID)
- Define a security
level for the Legrand
Access point
Low (unrestricted access)
No password
Medium (WEP 64 Bits)
Enter a network key (10 Hexadecimal
characters)
Medium (WEP 128 Bits)
Enter a network key (26 Hexadecimal
characters)
High (WPA-Personal)
Enter a network key (8 characters minimum,
alphanumeric)
Note down your network key on the reverse of
the ID card.
Click Finish
then
Click OK
Your Wireless Access point is now configured. To disconnect from the Access point,
The Legrand Access point supports 3
encryption techniques:
WEP 64-bit:
supported by all wireless equipment
WEP 128-bit:
similar to WEP 64-bit but offers improved
security
WPA-PSK:
more recent, offering the highest level of
security possible. WPA is much more robust
than the WEP protocol.
close your browser
7