Subscribe to Our Youtube Channel
Related Manuals for LEGRAND Luxul Apex XAP-1610
Summary of Contents for LEGRAND Luxul Apex XAP-1610
- Page 1 QUICK INSTALL GUIDE ™ Apex Wave 2 AC3100 Dual-Band Wireless Access Point XAP-1610 Includes: „ Wave 2 AC3100 Dual-Band Wireless AP „ Mounting Brackets and Hardware „ PoE Injector and Power Adapter „ Ethernet Cables...
- Page 2 READ ME FIRST - CONTROLLER COMPATIBILITY This XAP-1610 is compatible with the Luxul Wireless Controller for fast, easy configuration and deployment of wireless networks with multiple APs. Note: If you’ll be using this AP with a Wireless Controller, refer to the Quick Install Guide included with the Wireless Controller for setup instructions.
- Page 3 Single Access Point Placement: Because the signal generated by the XAP-1610 is omnidirectional, the unit should be located as near as possible to the center of the desired coverage area. XAP-1610 Single AP Coverage Pattern Multiple Access Point Placement: You may need to experiment with AP placement to optimize the roaming experience.
- Page 4 AP SETUP AND CONFIGURATION CONT. Connecting Ethernet and Power Ethernet and Power To apply power and network simultaneously, simply connect one end of an Ethernet cable to a PoE+ switch, and the other end to the XAP-1610 PoE port. To connect power and Ethernet separately, first connect an Ethernet cable from the supplied PoE Injector Data &...
- Page 5 Preparing for Access IP Addressing If the XAP-1610 is connected to a network with a 192.168.0.X address scheme, and your computer shares a similar address on the same network, you can skip to the next step, Access and Setup . If your network uses an address scheme other than 192.168.0.X, you’ll need to set a temporary static IP address on the computer you’re using for config- uration.
- Page 6 Logging In To access the AP’s web configuration, open your web browser and enter the AP’s default 192.168.0.10 IP address in the address field. Log in to the AP using the default user name and password: Default IP: 192.168.0.10 Username: admin Password: admin Note: If another device on your network shares the 192.168.0.10 address, you’ll need to temporarily reassign or remove that device while...
- Page 7 PoE Injector: If the Green ON LED is illuminated, power is connected to the injector. If the ON LED is not lit, the injector is not receiving power. Reset Button The Reset button is located underneath the mount and marked RESET. It may be used to reboot the AP or to restore factory default settings.
- Page 8 Sales Technical Support P: 801-822-5450 Option 1 P: 801-822-5450 Option 3 E: sales@luxul.com E: support@luxul.com Copyright and Trademark Notices No part of this document may be modified or adapted in any way, for any purposes without permission in writing from Luxul. The material in this document is subject to change without notice. Luxul reserves the right to make changes to any product to improve reliability, function, or design.
Need help?
Do you have a question about the Luxul Apex XAP-1610 and is the answer not in the manual?
Questions and answers