Advanced - LEGRAND Wireless access point Configuration Manual

2.2.4

/ ADVANCED

This section allows you to configure additional parameters for your Legrand Access point. We
recommend that you use the default values for all fields in this window.
Hide SSID
"No" is the default option, so that mobile wireless users can see the name of your Legrand
access point and connect to it. If you select "Yes", your network will not appear in the list
of available networks for wireless clients, so users will have to enter the access point SSID
manually. If you wish to restrict access to your network, select "Yes". For security reasons,
change the default SSID.
Configure isolated AP
16
Selecting "Yes" will prevent wireless clients from communicating with each other.
Data transmission speed (Mbit/s)
You can use this field to specify the transmission rate. Leave it set on "Auto" to maximize
performance in relation to distance.
Base rate
This field indicates the base transmission rates that the wireless client must support.
Use "1 & 2 Mbit/s" only in case backward-compatibility is required with certain old wireless
network cards with connection speeds limited to 2 Mbit/s.