Quick Configuration; Connecting The Access Point To The Local Network - LEGRAND Wireless access point Configuration Manual

1

/ QUICK CONFIGURATION

1.1

/ CONNECTING THE ACCESS POINT TO THE LOCAL NETWORK

To start configuration, your wireless access point must be connected to the local network via a
cable.
Your computer must also be connected to the local network using:
- another network cable or
- the wireless connection.
If you use the wireless connection, you need to use the wireless connection manager on your
computer to display the networks available and connect to the network (SSID) indicated on the
ID card of your Legrand Access Point.
This CD-Rom enables you to secure your wireless network. Place the CD in the appropriate drive
in your computer, the main menu of the CD-Rom will automatically be displayed. Otherwise use
Windows explorer to browse the content of the CD-Rom and double-click on the setup.exe icon.
Once installed on your computer, this device discovery tool can be accessed via:
Start menu/Programs/ASUS discovery/WL-330ge Wireless AP/Device discovery
Connecting your computer using a network
cable
Connecting your computer using a wireless
connection
4