Aastra Dialog 4425 IP Vision User Manual page 26

Dialog 4425 IP Vision
Continued startup procedure
The display shows:
Settings CallList
Use administrator mode to change IP settings
A timer counts down from 5 seconds. If no key is pressed during
this time,
(No change)
Notes:
You can speed up the procedure by pressing
(No change)
The administrator mode is used to change the IP settings in
your phone. This mode is reserved for your system
administrator.
The display now indicates that the phone is connecting to the
server and the software is loading. This takes about 1 minute. After
a self test, the phone is ready for use or ready for log on. To log on,
see section "Log on" on page 29.
Contacts
is selected automatically.
.
Start the Phone – Log On/Off
5
(No change)
27