Lan Access Control (Network Authentication) - Aastra Dialog 4425 IP Vision User Manual

Start the Phone – Log On/Off
Log on
Log on
26

LAN access control (network authentication)

Your telephone might require a network authentication to gain
access to the network. In this case you must enter a valid user
identity and PIN or password.
Note: The user identity and password used for the network
authentication is not the same user identity and password
you use to log on. The password is obtained from, and can
only be changed by the system administrator.
Settings
LAN access control
Enter user ID:
z
Enter your user identity.
(The display menu key
z
Press (see display).
Enter your PIN or password.
(The display menu key
Note:
The password can be entered with letters or numbers, see
section
The PIN is the same as the Individual Authorization Code.
Only digits can be used as PIN. The PIN must be four digits
or more.
Press (see display).
If your user identity and password are accepted, the phone
continues with the startup procedure.
Note: If your user identity and password are not accepted,
contact your system administrator.
CallList Contacts
, is used to remove a wrong entry.)
Erase
, is used to remove a wrong entry.)
Erase
"Entering names and
Erase Log on
numbers" on page 52.
Dialog 4425 IP Vision