MC40 User Guide
Procedure Steps
1
Touch
.
Slide the Wi-Fi switch to the On position.
2
3
Touch Wi-Fi. The MC40 searches for WLANs in the area and lists them.
Figure 4-1 Wi-Fi Screen
Scroll through the list and select the desired WLAN network.
4
5
For open networks, touch Connect or for secure networks enter the required password or other credentials
then touch Connect. See the system administrator for more information.
The MC40 obtains a network address and other required information from the network using the dynamic host
configuration protocol (DHCP) protocol. To configure the MC40 with a fixed internet protocol (IP) address,
Refer to the MC40 Integrator Guide for more information.
6
In the Wi-Fi setting field, Connected appears indicating that the MC40 is connected to the WLAN.
4-2
MN000111A01 - August 2013