Battery Management; Figure 1-5 Remove Battery - Motorola MC40 User Manual

MC40 User Guide
5 Remove the battery out of the battery compartment.

Figure 1-5 Remove Battery

Align the replacement battery in the battery compartment.
6
7 Lower the battery and press down until it snaps into place.
8 Press down on the battery latch.
Press the Power button to turn on the MC40.
9

1.3.5 Battery Management

Prior to checking the battery charge level, remove the MC40 from any AC power source (cradle or cable).
To check the charge status of the main battery, touch
Battery status indicates that the battery is discharging and Battery level lists the battery charge (as a percentage
of fully charged).
Monitor Battery Usage
The Battery Use screen lists which applications consume the most battery power. Also use it to turn off applications
that were downloaded if they are consuming too much power.
Touch >
1-8
Battery.
> About device > Status.
MN000111A01 - August 2013