GREAT PLANES Super Stearman Instruction Manual page 33

9. Put a small drop of CA on the cord, then insert it into
the hole shown.
10. Bring the elastic cord around the top of the forward
strut and pull it back toward the fuselage. Glue the cord into
the hole next to the hole you started with
11. Repeat this process for the rear strut.
12. Cut two elastic cords 25" [635mm] long. Use CA to
glue the ends together forming a loop. When gluing the ends
together, overlap the cord approximately 1/2" [13mm].
13. Remove the screws from the top cabanes, install
the cord around the cabane and then re-install the screws.
Do this on the bottom of the wing struts as well.
33