Paradise Datacom P300 Series Installation & Operating Handbook page 27

P300 series satellite modems (including p310 l-band and turbo fec options)
Hide thumbs Also See for P300 Series:
Table of Contents

Advertisement

Monitor Functions
Clocking and Buffering
Clock Loops
Tx Clocking
Rx Clocking
Internal Reference
Station References inputs
Buffer Size
Framing & Deframing
Formats
P300H
P300 Series Modem Installation and Operating Handbook
Measured FEC input BER (raw channel, not TCM)
Estimated FEC output BER (not TCM)
Measured Reed-Solomon input BER
Estimated Reed-Solomon output BER
Measured deframer FAW BER
Measured Eb/No (not based on channel BER, range: 3.0-15.0dB,
accuracy 0.2dB).
Measured frequency offset ( 100 Hz resolution)
Frequency locked loops give phase hit immune operation even with
poor clock sources such as routers etc.
Internal Reference (see Internal Reference below for stability)
External - tracking range 100 ppm / min.
Rx Timing - slaves Tx internally generated timing from Rx clocking
whatever Rx clocking mode is selected eg with Rx=Satellite for loop
timing (with full asymmetric rate capability), or with Rx=Station for
both Tx & Rx clocking slaved to Station Clock (again with full
asymmetric rate capability).
Clock from satellite (Buffer disable)
Transmit input clock - (plesiochronous, includes full asymmetric rate
operation)
Internal Reference (see Internal Reference below for stability)
DCE External timing clock (DTE interface only).
Station reference (see below)
P300: +/-1PPM
P310: Default as per P300. Options: 7x10-7 per year (P313B), 1x10-7
per year (P313C), 7.5x10-8 per year (P313D).
75 BNC female, transformer isolated 1MHz to 10MHz in 1kHz steps
(accepts sinusoid >0dBm or squarewave eg G.703 para 10)
120 RS422 compatible input, 1kHz to 10MHz in 1kHz steps
When set to 10MHz, the station reference may replace internal
reference to all internal circuitry (eg IF synths). The unit automatically
switches back to the internal reference if the station reference fails.
Selectable in 1 ms increments from 0 to 99 ms. Automatically adjusted
to slip an integer multiple of terrestrial multiframe length for framed
rates (T1/E1).
Buffer storage is 32kBytes, so above 2.6 Mbps max buffer size
reduces linearly from 99 ms to 52ms at 5.0Mbps
Closed Network (unframed)
Page 27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents