Info Menu - Paradise Datacom P300 Series Installation & Operating Handbook

modem front panel or Terminal , where the modem control the BUC and the
modem RF output power to maintain a fixed power level at the BUC output
(taking out temperature induced variations in the cable etc)
Subsequent screens (those marked * only visible when the BUC is FSK capable) include:
*
The BUC communications status & Address, Temperature & PLL lock status
* The BUC Set power, the Measured power, set output status (on/off) and attenuator range & value
*
The FSK generator/receiver status, true output status (on/off)
The DC & 10MHz ref supply to the BUC on/off setting, measured current and current low/high trip
limits

6.14 INFO MENU

Info Menu
This screen displays the modem number, serial number and software version.
Pressing Down Arrow leads to further screens, which give the identity of the
sub-boards and interfaces fitted to the equipment.
This screen (together with screens accessed by the down arrow) give the
manufacturer with contact fax and phone numbers, and e-mail addresses.
This screen allows the configuration of the modem to be displayed. After
selecting between Tx, Rx, Interface, Common and Remote M&C, subsequent
presses of the down arrow display every parameter in that group.
This option displays information relating to the terrestrial interface card fitted
into the modem. The information includes: Card type (and what card it is
emulating when it is a multi-standard card), the data rate limits, and a list of
every interface line the card provides along with a brief description of the
function of that line (example follows)
Info, Terr-Intfc (sample interface line description)
This option allows the current feature set of the modem to be checked and also
further features added by entering a `Feature Code`. Refer to Appendix C for
further details.
This menu is only available on the P310 L-Band modem. It provides information
on the current BUC & LNB connected
P300H P300 Series Modem Installation and Operating Handbook
Info: 1:This unit 2:Supplier 3:View Config
4:Terr-Intfc 5:Features 6:BUC/LNB
The options are as follows:
Tx path input SD=Main Tx data input
Stable on rising edge of TT-B line
.
Page 120