Paradise Datacom P300 Series Installation & Operating Handbook page 196

features that the hardware can support but which are not enabled in the software. These are therefore
features that can be gained without hardware changes by entering a `Feature Code` issued by Paradise.
Other features are available but may require a hardware upgrade (ie a chip to be plugged in or a PCB to
be added)
If you contact Paradise Datacom directly we will supply within a few minutes by fax a Feature Code to
provide the extra features you require (eg addition of Reed-Solomon etc). This will be a temporary code
valid for probably 30 days to enable you to raise and place a purchase order on your supplier. When you
place a formal order on the supplier for the features, a Feature Code will be provided to make the
features permanent. If you are unable to contact Paradise Datacom for some reason use one of the 5
day `Feature Tests` to give you all the features for 5 days while you contact us. Each modem has only 3
`Feature Tests` of 5 days each, but when you enter a valid Feature Code the number of `Feature Tests`
will be reset to 3 again.
FEATURES: TEST
These screens give the user access to start and monitor the user enabled Test features facility. This
enables the user to test all the features the modem can provide, for a period of 5 days, up to three
times on each modem.
P300H P300 Series Modem Installation and Operating Handbook Page 196