Table of Contents
Advertisement
3. PPTP Password
Input the Password supplied by ISP.
4. Retype your Password
Retype the password into this blank for confirming.
5. PPTP Server IP
Input the Server IP supplied by ISP. If you don't know, please check with your ISP.
6. My WAN IP
Input the WAN IP address provided by your ISP.
7. My WAN Subnet Mask
Input the WAN Subnet Mask supplied by your ISP. If you don't know, please check with
your ISP.
8. MTU
MTU stands for Maximum Transmission Unit. For PPTP connections, you may need to
set the MTU setting in order to work correctly with your ISP.
9. Idle Time
The time of inactivity before disconnecting your PPTP session. Enter an Idle Time (in
minutes) to define a maximum period of time for which the Internet connect is maintained
during inactivity. If the connection is inactive for longer than the defined Idle Time, then
the connection will be dropped. Either set this to zero or enable Auto-reconnect to
disable this feature.
10. DNS
If ISP provided you DNS information, please select "Specify DNS Server IP" and input
the DNS information into the blank; otherwise, select "No Default DNS Server".
11. Apply & Cancel
Click on Apply button to continue. Click on Cancel button to clean the setting on this
page.
52
Advertisement
Table of Contents
