Table of Contents
Advertisement
3.3.1.3 PPPoE
If you applied for a PPPoE connection type from ISP, please follow the steps to setup your
WAN connection.
1. User Name
Input your User Name supplied by ISP. If you don't know, please check with your ISP.
2. Password
Input your Password supplied by ISP.
3. MTU
MTU stands for Maximum Transmission Unit. For PPPoE connections, you may need to
set the MTU setting in order to work correctly with your ISP.
4. Idle Time
The time of inactivity before disconnecting your PPPoE session. Enter an Idle Time (in
minutes) to define a maximum period of time for which the Internet connect is maintained
during inactivity. If the connection is inactive for longer than the defined Idle Time, then
the connection will be dropped. Either set this to zero or enable Auto-reconnect to
disable this feature.
5. Auto-reconnect
If enabled, the Router will automatically connect to your ISP after your system is
50
Advertisement
Table of Contents
