Table of Contents
Advertisement
3.3.1.1 Static IP
The WAN (Wide Area Network) page shows the settings that are used to connect to your ISP
(Internet Service Provider). Please select the Static IP for your specific ISP.
If you applied for a Static IP connection type from ISP, please follow the steps to setup your
WAN connection.
1. IP Address
Input your IP Address supplied by ISP. If you don't know, please check with your ISP.
2. Subnet Mask
Input your Subnet Mask supplied by ISP
3. IP Gateway
Input your IP Gateway Address. If you don't know, please check with your ISP.
4. DNS
If ISP provided you DNS information, please select "Specify DNS Server IP" and input
the DNS information into the blank; otherwise, select "No Default DNS Server".
5. Apply & Cancel
Click on Apply button to continue. Click on Cancel button to clean the setting on this
page.
48
Advertisement
Table of Contents
