Control Panel; Identification Of The Display Areas - Eaton 40 kVA User And Installation Manual

6

Control Panel

The control panel, located on the front door of the UPS, contains LCD screen and pushbutton
switches to control the operation of the UPS, and to display the status of the UPS system.
Figure 25. UPS Control panel.
The Control Panel consists of the following:
• A Liquid Crystal Display (LCD) screen (1)
• A horizontal row of pushbutton switches (2)
• A vertical column of status indicators (3)
When the unit powers up, the screen displays the Powerware logo. To advance to the Main menu
and Mimic screen, press any Control Panel pushbutton once. After approximately 30 minutes on
inactivity, the display screen darkens. To restore the screen, press any pushbutton once.

6.1 Identification of the display areas

The LCD screen on the Control Panel provides an operator interface with the UPS system.
You can use the LCD screen and the pushbuttons to:
• Look at a log of UPS events (alarms, notices, and commands)
• Monitor UPS operation
• Set UPS parameters
• Control UPS operation
Figure 26. Display areas of the LCD screen.
1023294
Revision C
UPS 40 – 160 kVA, 400V 50/60 Hz output
User's and Installation Guide
35