Table of Contents
Advertisement
Supply power to the Managed Switch.
Step 5:
Connect one end of the power cable to the Managed Switch.
Connect the power plug of the power cable to a standard wall outlet.
When the Managed Switch receives power, the Power LED should remain solid Green.
2.2.2 Rack Mounting
To install the Managed Switch in a 19-inch standard rack, please follow the instructions described below.
Place the Managed Switch on a hard flat surface, with the front panel positioned towards the front side.
Step 1:
Attach the rack-mount bracket to each side of the Managed Switch with supplied screws attached to the package.
Step 2:
Figure 2-2-2
shows how to attach brackets to one side of the Managed Switch.
Secure the brackets tightly.
Step 3:
Follow the same steps to attach the second bracket to the opposite side.
Step 4:
After the brackets are attached to the Managed Switch, use suitable screws to securely attach the brackets to the
Step 5:
as shown in
Figure
Figure 2-2-2: Attach Brackets to the Managed Switch.
You must use the screws supplied with the mounting brackets. Damage caused to the parts by
using incorrect screws would invalidate the warranty.
2-2-3.
User's Manual of XGSW-28040HP
27
rack,
Advertisement
Table of Contents
