4.6.8 VLAN setting example:
Separate VLAN
802.1Q VLAN Trunk
Port Isolate
4.6.8.1 Two Separate 802.1Q VLANs
The diagram shows how the Managed Switch handle Tagged and Untagged traffic flow for two VLANs. VLAN Group 2 and
VLAN Group 3 are separated VLAN. Each VLAN isolate network traffic so only members of the VLAN receive traffic from the
same VLAN members. The screen in
Switches.
VLAN Group
VLAN Group 1
VLAN Group 2
VLAN Group 3
The scenario is described as follows:
Untagged packet entering VLAN 2
Figure 4-6-8
appears and
Figure 4-6-8: Two Separate VLANs Diagram
VID
Untagged Members
1
Port-7 ~ Port-28
2
Port-1,Port-2
3
Port-4,Port-5
Table 4-1: VLAN and Port Configuration
118
User's Manual of XGSW-28040HP
Table 4-6-9
describes the port configuration of the Managed
Tagged Members
N/A
Port-3
Port-6