Object
System PoE Admin
Mode
PoE Temperature
Protection
PoE Management
Mode
Power Supply Budget
[W]
Temperature
Threshold
PoE Usage Threshold
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
PD Classifications
A PD may be classified by the PSE based on the classification information provided by the PD. The intent of PD classification is
to provide information about the maximum power required by the PD during operation. However, to improve power management
at the PSE, the PD provides a signature about Class level.
The PD is classified based on power. The classification of the PD is the maximum power that the PD will draw across all input
voltages and operational modes.
A PD will return to Class 0 to 4 in accordance with the maximum power draw as specified by
Class
Usage
Default
0
Description
Allows user enable or disable PoE function. It will causes all of PoE ports supply
or not supply power.
Allows user enable or disable PoE Temperature Protection.
There are Six modes for configuring how the ports/PDs may reserve power and
when to shut down ports.
Class-Consumption mode: System offers PoE power according to PD real
power consumption.
Class-Reserved-Power mode: System reserves PoE power to PD
according to PoE class level.
Allocation-Consumption mode: System offers PoE power according to PD
real power consumption.
Allocation-Reserved-Power mode: Users allow to assign how much PoE
power for per port and system will reserves PoE power to PD.
LLDP-Consumption mode: System offers PoE power according to PD real
power consumption.
LLDP-Reserved-Power mode: System reserves PoE power to PD
according to LLDP configuration.
Set limit value of the total PoE port provided power to the PDs.
XGSW-28040HP available maximum value is 440.
Allows setting over temperature protection threshold value. It system
temperature was over it then system lower total PoE power budget automatically.
Allows setting how much PoE power budget could be limited.
Range of maximum power used by the PD
12.95 watts (or to 15.4 watts for AF mode)
25.5 watts (or to 30.8 watts for AT mode)
User's Manual of XGSW-28040HP
317
Table 4-16-1.
Class Description
Mid power or High power