Service Interval and Recommended Maintenance Manual
Remove the pad pin and the brake pads.
Install the new pads so that their ends rest on the pad
retainer on the bracket properly.
Install the pad pin by pushing the pads against the pad
springs to align the pad pin holes and the pin holes in the
pads and the caliper.
Tighten the pad pin to 13 lb.ft. torque. (1.8 kgf.m)
Install and tighten the pad pin plug and torque to 2.2
lb.ft. (0.3 kgf.m)
After replacement, operate the brake lever to seat
the caliper pistons against the pads.
Honda VT750CD ACE
57