Honda VT750DC ACE Service Interval And Recommended Maintenance Manual page 36

Hide thumbs Also See for VT750DC ACE:
Table of Contents

Advertisement

Honda VT750DC ACE 
NOTE: As you remove the carburetors, take note of the routing for the choke cables. Maybe draw a picture or
take a picture with your digital camera. Because the carbs can be re-installed with these cables routed wrong
and then the choke may be difficult to open or may have too much spring-back on it, like I found out on my
bike.
 
36 
 
Remove all the spark plug caps.
Remove the bolts and then remove the rear cylinder left
side fins and choke (SE Valve) knob and bracket.
I also removed the forward cylinder ignition coil from the
frame and moved it and the two plug wires back and out
of the way... to give a bit more access room above the
cylinders.
Disconnect the sub-air cleaner tube from the front side
carburetor.
Loosen the intake insulator band clamp screw on the
forward cylinder and remove the carburetors together
through the LEFT HAND side of the bike. (Note: the
Honda service manual incorrectly says to remove
through the right hand side. They will only fit through the
left hand side!!!)
  Service Interval and Recommended Maintenance Manual 

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents