Honda VT750DC ACE
Step 3: Remove the Steering Cover:
Step 4: Remove the Air Cleaner & Air Chamber:
Remove the two (2) air cleaner housing bolts (not the 6 hex head bolts for the cover!). Then loosen the air
cleaner housing to chamber band clamp with the screw. Pull the air cleaner housing away.
34
Remove the trim clips, then remove the two halves as an
assembly. Remove the joint clip if you wish to separate
the halves.
For the air chamber, you need to loosen the band clamps
at the intakes for the carburetors. Then pull the chamber
a little ways from the frame and disconnect the
crankcase breather tube from the chamber. Remove the
air chamber.
Service Interval and Recommended Maintenance Manual