Service Interval and Recommended Maintenance Manual
Install the brake arm on the brake cam, aligning the
punch marks on the arm with those on the cam. Install
and tighten the pinch bolt to 22 ft.lb. (3.0 kgf.m).
Apply grease to the brake shoe-to-cam contact surfaces.
Apply grease to the anchor pins.
Attach the springs to the new shoes and install them
onto the brake panel.
Install the Set Plate and NEW Cotter Pins.
Install the brake panel back onto the wheel and re-install
the rear wheel onto the motorcycle. ( ref: Task 21 -
Removal & Installation of the Wheels )
Honda VT750CD ACE
55