Installation Guide
15
6. Align the bottom of the ceiling T-bar with the back of the Access Point.
7. Orient the Access Point chassis by its length and the length of the ceiling T-bar.
8. Rotate the Access Point chassis 45 degrees clockwise.
9. Push the back of the Access Point chassis on to the bottom of the ceiling T-bar.
10. Rotate the Access Point chassis 45 degrees counter-clockwise. The clips click as they fasten to the T-bar.
LED Indicator
11. Verify the behavior of the Access Point LEDs. For more information, see
.
12. The Access Point is ready to configure. For information on basic Access Point device configuration, see
Basic Access Point Configuration
.