JVC LVT1627-001A Instructions Manual page 220

Menu items
External Input
Video Input *9
Interlock
Horizontal/
Vertical
Video Format
*8 Not selectable when the component connected to the CD changer jack is selected as the source.
*9 Not selectable when "EXT-IN" is selected as the source.
*10 Reverse lamp lead connection is required. (☞ Installation/Connection Manual)
*11 Speed signal lead connection is required. (☞ Installation/Connection Manual)
*12 Not selectable when Video Input is set to Off.
94
Selectable settings
When connecting an external component to the CD
*8
changer jack on the rear.
Changer: CD changer, iPod, or D. player.
Ext Input: Any other than the above.
• For connecting the DAB tuner or the Bluetooth Adapter,
this setting is not required. It is automatically detected.
You can determine the use of the VIDEO IN plug. ☞ [82]
Off: Select if no component is connected. (Video input is
skipped while changing the display with DISP key.)
Video: Select when connecting an AV component such as
VCR.
Camera: Select when connecting a camera.
Off: Cancels.
Reverse: Automatically switch to the camera view when
the gear is shifted into reverse.
Low Speed: Automatically switch to the camera view
when your car slows down.
Horizontal adjustment is required according to how you
would like to see the picture on the monitor. Vertical
adjustment is required according to how you have installed
your camera.
Vertical:
Normal
Vertical:
Reverse
Select the format of video input according to the colour
*12
system of the component connected to the VIDEO IN
plug.
NTSC, PAL
*10
*11
Horizontal: Normal
(Initial setting)
Horizontal: Reverse