Using Bluetooth® Devices; Mobile Phone/Audio Player; Menu Operation For Bluetooth Devices; Registering A Bluetooth Device - JVC LVT1627-001A Instructions Manual

Using Bluetooth® devices—
For Bluetooth operations, it is required to connect the Bluetooth Adapter (KS-BTA200) to the CD
changer jack on the rear.
• Refer also to the instructions supplied with the Bluetooth Adapter and the Bluetooth device.
• Refer to the list (included in the box) to see the countries where you may use the Bluetooth®
function.

Menu operation for Bluetooth devices

Registering a Bluetooth device

AV screen:
= Bluetooth Audio
Map screen/AV
screen: other sources
than Bluetooth Audio
Using the Bluetooth mobile phone
Map screen/
AV screen
Registering a Bluetooth device
Preparation:
Operate the device to turn on its Bluetooth
function.
To use a Bluetooth device through the unit
("Bluetooth Phone" and "Bluetooth Audio") for
the first time, you need to establish Bluetooth
wireless connection between the unit and the
device.
• Once the connection is established, it is
registered in the unit even if you reset your
unit. Up to five devices can be registered in
total.
• Only one device for Bluetooth Phone and one
for Bluetooth Audio can be connected at a
time.
AV Menu
Mode
Phone Menu
Mode
List
[Hold]
Phone Menu
Mode
List
[Hold]

Mobile phone/audio player

2/2
Registration (Pairing) methods
• Use Phone Menu to register a device as a
mobile phone.
• Use AV Menu to register a device as an
audio player.
Make the unit ready to establish
Open
a new Bluetooth connection.
Connection is established by
operating the Bluetooth device.
Make the unit ready to establish
Search
a new Bluetooth connection.
Connection is established by
operating this unit.
Using Bluetooth devices
Mode
Dial
Message
Open
Search
Special Device
Mode
Dial
Message
Open
Search
Special Device
Bluetooth Phone
P902i
10:35
1/2
1/2
83