JVC LVT1627-001A Instructions Manual page 89

Phone Menu (continued)
Menu items
Connect *3
Disconnect *3
Delete Pair *3
Auto Connect
Auto Answer
Message Info
Microphone
Level *4
Version
*1 Selectable items vary depending on the connected device.
*2 Selectable only when the device is compatible with text message.
*3 Also available in Mode in AV Menu for Bluetooth Audio.
*4 Not selectable for New Device.
Bluetooth Information:
If you wish to receive more information about
Bluetooth, visit our JVC web site.
Selectable settings
Only for the registered devices.
After selecting a device from among the registered devices (☞ [85,
87]), establish the connection with it. ☞ [85]
Only for the device being connected.
Disconnect the current device before connecting another device. ☞
[85]
Only for the registered devices.
Delete the registered devices. ☞ [85]
When the unit is turned on, the connection is established
automatically with...
Off: No Bluetooth device.
Last: The last connected Bluetooth device.
Order: The available registered Bluetooth device found at first.
Only for the device being connected for "Bluetooth Phone."
*4
Off: The unit does not answer the calls automatically. Answer the call
manually.
On: The unit answers the incoming calls automatically.
Reject: The unit rejects all incoming calls.
Only for the device being connected for "Bluetooth Phone."
*4
Auto: The unit informs you of the arrival of a message by ringing and
displaying Receiving Message. To read the message, press ENT
(☞ [87]).
Manual: The unit does not inform you of the arrival of a message.
Only for the device being connected for "Bluetooth Phone."
Adjust microphone volume connected to the Bluetooth adapter.
1, 2, 3
The Bluetooth software and hardware version is shown.
The Bluetooth word mark and logos are
owned by the Bluetooth SIG, Inc. and any
use of such marks by Victor Company of
Japan, Limited (JVC) is under licence. Other
trademarks and trade names are those of their
respective owners.
Using Bluetooth devices
(Initial setting)
89