IBM System/34 Maintenance Manual page 295

27-225 AC DRIVE MOTOR REMOVAL AND
REPLACEMENT
Removing the AC Drive Motor
1.
2.
Remove power and the 72MD unit (see paragraph
27-200).
Disconnect the At drive motor power cable
G.
3. Remove the drive belt
e.
4.
Remove the two motor mounting clamps
G.
5. Remove the motor
8.
Reinstalling the AC Drive Motor
1. Place the drive motor
8
on the casting and fasten
it with the two· motor mounting clamps
O.
2. Reinstall the drive belt
O.
3. Connect the AC drive motor power cable
G.
4.
Reinstall the 72MD unit (see paragraph 27-200).
10
.......
.....
"' ' ' '
27-225