Table of Contents
Advertisement
\
0
_-"
25-130
DISKETIE DRIVE ASSEMBLY
Removal and Replacement
1.
Set Power to 0 (operator panel).
2.
3.
Open the diskette drive cover.
Open the front left side cover and remove screw
0;
open the front right side cover and remove
screw
O.
Remove the panel assembly.
4.
Remove the ground wire
e.
5.
Remove the four side panel screws
e
and the
side panel.
6.
7.
Remove one end of the 53FD cable clamps.
Turn the locks
G;
remove the 53FD and mounting
frame from the machine.
8.
If power is not needed disconnect the cables so
the unit can be moved to a convenient location.
CAUTION
Ensure that the cables are clear of the bracket
0
when
the 53FD and mounting frame are reinstalled.
9.
To reinstall, reverse the above procedure .
25-130
53FD Diskette Drive
5
•
Advertisement
Chapters
Table of Contents
