Adjusting Av Output Volume - JVC EXAD KD-AV7000 Instructions Manual

Adjusting AV OUTPUT volume

Select an appropriate volume level for the
component connected to the AV OUTPUT
jacks on the hideaway unit.
• This functions without respect to the Dual
Mode setting.
1
2
* 1
3
4
Adjust the AV output volume.
1
*
It does not appear for some sources.
2
*
It will be shaded when not available.
On the remote controller
MAIN SUB
While Dual Mode is in use...
• The playback source does not change to
"DISC" though you insert a disc. "DUAL"
flashes on the display of the main unit.
• You can only adjust the volume level for
the subsidiary source (the other sound
adjustments cannot be used for the
subsidiary source).
34
2
*
then
AVOUT VOL
When using the remote controller:
• For Dual Mode operations...
– When controlling the monitor connected
to the AV OUTPUT jacks, aim the
remote controller at the remote sensor
on the main unit.
– When controlling the monitor inserted
into the cradle, aim the remote controller
at the remote sensor on the cradle.
To activate Dual Mode
1
*
Each time you press and hold the button,
Dual Mode turns on and off.
• When Dual Mode is turned on, the source
selection screen appears on the monitor
(see page 33).
To operate the subsidiary source
1
2 Press the source buttons, then the
source operation buttons.
To operate the main source
1
2 Press the source buttons, then the
source operation buttons.
Hold
ZOOM
DUAL
MAIN SUB
MAIN SUB