JVC EXAD KD-AV7000 Instructions Manual page 220

Dvd receiver with monitor
Hide thumbs Also See for EXAD KD-AV7000:
Table of Contents

Advertisement

4
Adjust the selected surround or DSP
mode.
When surround mode is activated:
: Selected automatically when multi-
channel DTS signal is detected (while
playing a DVD or a DTS CD). No further
adjustment is allowed.
: Selected automatically when multi-
channel Dolby Digital signal is detected
(while playing a DVD). No further
adjustment is allowed.
"MUSIC."
When you select "MUSIC," you can adjust
the following items.
"wraparound" sound effect with side-wall
image. To cancel it, select "OFF."
so it may be heard only from the center
speaker, only from the left/right front
speakers as a "phantom" center image, or
various combinations of these speakers.
As the number increases, the "phantom"
effect becomes stronger. (Normally select
"4.") To cancel it, select "OFF."
38
: Select either "MOVIE" or
: Select "ON" to add
: Adjust the center image
When DSP mode is activated:
Ex. When selecting "HALL."
1 Select one of the DSP modes.
HALL:
Reproduces the spatial
feeling of a large shoebox-
shaped hall designed
primarily for classical
concerts.
LIVE:
Reproduces the spatial
feeling of a live music club
with a low ceiling.
CLUB:
Reproduces the spatial
feeling of a rocking dance
club.
DOME:
Reproduces the spatial
feeling of a stadium with a
high ceiling.
THEATER: Reproduces the spatial
feeling of a theater.
2 Adjust the effect level (from 1 to 5).
As the number increases, the effect
becomes stronger.

Advertisement

Table of Contents
loading

Table of Contents