JVC EXAD KD-AV7000 Instructions Manual page 234

AV2 INPUT SELECT
You can determine the use of AV INPUT 2
jacks on the hideaway unit—select either
"VIDEO" or "CAMERA."
• When the playback source is "AV2," this
setting cannot be changed.
• VIDEO: The source "AV2" works for
viewing the playback picture
through the component
connected to the AV INPUT 2
jacks.
• CAMERA: Select this when connecting the
rear view camera.
– You can set the remaining two
BACK GEAR
• AUTO: The rear view through the rear view
camera is automatically displayed on
the monitor when you change the
gear to the back position.
• OFF: Cancels this function. To watch the
rear view, select "AV2" for the
source.
CAMERA VIEW
• NORMAL: You can watch the rear view as
the camera takes.
• MIRROR: You can watch the rear view as
reflected on the mirror.
While watching the camera view, you can change
it to the source playback screen by touching the
center portion of the monitor screen. (In this case,
you cannot change the aspect ratio and make
monitor adjustments—see pages 24 and 42.)
52
items (BACK GEAR/
CAMERA VIEW).
FM IF FILTER
In some areas, adjacent stations may interfere
with each other. If this interference occurs,
noise may be heard.
• AUTO: When this type of interference occurs,
this unit automatically increases the
tuner selectivity so that interference
noise will be reduced. (But the stereo
effect will also be lost.)
• WIDE: Subject to the interference from
adjacent stations, but sound quality
will not be degraded and the stereo
effect will not be lost.
TELEPHONE MUTING
This mode works when a cellular phone system
is connected. Select either "MUTING 1" or
"MUTING 2," whichever mutes the sounds
from this unit.
TV CHANNEL AREA
This setting appears only when TV tuner unit
KV-C1000 or KV-C1001 is connected.
For KV-C1001 users: When you use the
optional TV tuner unit either in Italy or
Indonesia, select the country.
• Normally select "C.C.I.R."
For KV-C1000 users: No setting is required.