Table of Contents
Advertisement
3
BIOS Setup
Primary IDE Master to Third IDE Slave
When you enter the BIOS Setup Utility, the BIOS will auto detect the existing
IDE devices then displays the status of the detected devices. To configure an
IDE drive, move the cursor to a field then press <Enter>.
Primary IDE Master
Device
Type
LBA/Large Mode
Block (Multi-Sector Transfer)
PIO Mode
DMA Mode
S.M.A.R.T
32Bit Data Transfer
Type
Selects the type of IDE drive connected to the system.
LBA/Large Mode
Auto
If the device supports LBA mode, the LBA mode will automatically be en-
abled, that is, if the device was not previuosly formatted with the LBA mode
disabled.
Disabled
Disables the LBA mode.
Block (Multi-Sector Transfer)
Auto
Data transfer from and to the device occurs multiple sectors at a time.
Disabled
Data transfer from and to the device occurs one sector at a time.
64
BIOS SETUP UTILITY
Advanced
:Not Detected
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Select the type
of device connected
to the system.
Select Screen
← →
Select Item
↑↓
+ -
Change Option
F1
General Help
F10
Save and Exit
ESC
Exit
Advertisement
Table of Contents
