Power Connectors - DFI LR102 SERIES User Manual

Power Connectors

Use a power supply that complies with the ATX12V Power Supply Design Guide
Version 1.1. An ATX12V power supply unit has a standard 24-pin ATX main
power connector that must be inserted into the 24-pin connector. The 8-pin +12V
power connector enables the delivery of more +12VDC current to the processor's
Voltage Regulator Module (VRM).
The power connectors from the power supply unit are designed to fit the 24-pin
and 8-pin connectors in only one orientation. Make sure to find the proper orien-
tation before plugging the connectors.
The system board requires a minimum of 300 Watt power supply to operate.
Your system configuration (CPU power, amount of memory, add-in cards, pe-
ripherals, etc.) may exceed the minimum power requirement. To ensure that
adequate power is provided, we strongly recommend that you use a minimum of
400 Watt (or greater) power supply.
Important:
Insufficient power supplied to the system may result in instability or
the add-in boards and peripherals not functioning properly. Calculating
the system's approximate power usage is important to ensure that the
power supply meets the system's consumption requirements.
Hardware Installation
12 24
COM
+3.3VDC
+12VDC +5VDC
+5VDC
+12VDC
+5VDC
+5VSB
NC
PWR_OK
COM
COM
COM
+5VDC
COM
COM
+5VDC PS_ON#
COM
COM
+3.3VDC -12VDC
+3.3VDC
+3.3VDC
1 13
ATX power
2
49