DFI LR102 SERIES User Manual page 13

HDMI
HDMI (High-Definition Multimedia Interface) is a compact audio/video connector
interface for transmitting uncompressed digital streams. It delivers multi-channel
audio and uncompressed digital video signals for full HD 1080p visuals through a
single cable. Connect a LCD monitor or digital TV that has the HDMI port.
Note:
Both, HDMI and LVDS, use Chrontel CH7036; therefore, they will have
the same graphic output display.
PCI Express
PCI Express is a high bandwidth I/O infrastructure that possesses the ability to
scale speeds by forming multiple lanes. The x1 PCI Express lane supports trans-
fer rate of 2.5 Gigabytes (250MBbps) per second which is nearly 4 times faster
than the traditional PCI.
Audio
The Realtek ALC262 audio codec provides 2-channel High Definition audio output.
S/PDIF
S/PDIF is a standard audio file transfer format that transfers digital audio sig-
nals to a device without having to be converted first to an analog format. This
prevents the quality of the audio signal from degrading whenever it is converted
to analog. S/PDIF is usually found on digital audio equipment such as a DAT
machine or audio processing device. The S/PDIF connector on the system board
sends surround sound and 3D audio signal outputs to amplifiers and speakers
and to digital recording devices like CD recorders.
Serial ATA
Serial ATA is a storage interface that is compliant with SATA 1.0a specification.
With speed of up to 3GB/s, it improves hard drive performance faster than the
standard parallel ATA whose data transfer rate is 100MB/s.
Gigabit LAN
The Intel 82567V Gigabit Ethernet Phy controller support up to 1Gbps data trans-
mission.
USB
The system board supports USB 2.0 and USB 1.1 ports. USB 1.1 supports 12Mb/
second bandwidth while USB 2.0 supports 480Mb/second bandwidth providing a
marked improvement in device transfer speeds between your computer and a
wide range of simultaneously accessible external Plug and Play peripherals.
1
Introduction
13