Table of Contents
Advertisement
Sides identical
If the scanner supports two-sided (duplex) scanning, you can individually set the color mode and other options in
the scanner interface for each side of the page. This option is always selected and grayed out if the scanner
hardware does not support the feature.
(Example: Sides are identical)
While the option to enable or disable Sides identical is in the source configuration list, the color mode is not the
only option that can be individually configured for each side. Other options in the scanner interface, such as
resolution, brightness, contrast, etc... will also be individually set for each source. After you deselect Sides identical,
any changes you make in the scanner interface will only be applied to the option that appears at the top of the list
(for example, "Input tray (Front side) Color").
To set the scanner options individually for each side:
Click the drop down menu and deselect Sides identical.
1.
2.
Select the color mode you want for the first side.
3.
Click the top of the menu to collapse the list. Select the options in the scanner interface that you want to use
for the first side.
4.
When you are done making changes for the first side, click in the source configuration list and select the color
mode for the second side.
That side selection will now be displayed in the top of the source configuration list (for example, "Input tray
(Back side) Gray").
5.
Click the top of the menu to collapse the list. Select the options in the scanner interface that you want to use
for the second side.
Tip: Save the changes to a Preset when you are done selecting options for each source. Please refer to
more information.
(Example: Sides are different)
®
Xerox
DocuMate
Presets
for
®
151
5445 / 5460
User's Guide
Hide quick links:
Advertisement
Table of Contents
