1800Mx Convertible Top (If Equipped) - Maxum 1800MX Owner's Manual

Chapter 7: Deck Equipment

1800MX Convertible Top (If Equipped)

1. Insert the end eyes
of the main bow (A)
into the forward
deck hinges and
secure them with
the pins.
2. Insert the end eyes
of the aft braces (B)
into the aft deck
hinges and secure
them with the pins.
3. Unfold the canvas
top and pull the sec-
ondary bow (C) and
the canvas forward.
4. Open the center
windshield panel
and stand in the
opening.
5. Snap the snaps (D)
on each side of the
zipper to the first
two snaps (E) on the
starboard forward windshield frame.
6. Snap the forward edge canvas snaps to the port and starboard windshield frames.
7. Carefully close the center windshield panel and snap the remaining snaps to the center windshield frame.
8. Align the secondary bow (C) with the center seam of the canvas by loosening or tightening the top straps
(not pictured).
• The jaw slides (F) should not need to be adjusted.
• If you decide to adjust the jaw slide positions, obtain the correct measurements from your selling dealer.
• If other canvas (i.e. side curtains or slant back cover) is installed, the canvas top may need adjustment to align the
snaps on the canvas with the snaps on the boat.
56
END EYE
SPRING LOADED
SECURING PIN
HINGE
B
F
A
D
E
C